相信谁也不想自己的设备大修，但是如果出现需要及时修整的情况而不去施行的话，那么对设备的影响是很大的。究竟哪些问题需要及时的调整呢?下面山西罗茨风机厂家带大伙看一下。

I believe no one wants to overhaul their own equipment, but if there is a need to repair in time and do not implement it, then the impact on the equipment is great. What problems need to be adjusted in time? Now Shanxi roots blower manufacturers take you to have a look.

1.叶轮间隙过大的问题;

1. The impeller clearance is too large;

在罗茨风机上，叶轮和叶轮之间的间隙有一定的标准，如果在罗茨风机上使用时，叶轮和叶轮之间的间隙变大，将影响风机的正常运行。对一些小的罗风机，比如三叶罗茨风机，我们有一定的专业知识，可以自己修理。但是对于一些大型的罗茨风机，比如二叶风机，由于其叶轮尺寸较大，需要专门的机械设备来处理，所以如果风机叶轮间隙有问题，就需要回厂进行大修。

In Roots blower, there is a certain standard for the clearance between the impeller and the impeller. If it is used in Roots blower, the clearance between the impeller and the impeller becomes larger, which will affect the normal operation of the blower. For some small roots blowers, such as three leaf roots blowers, we have certain professional knowledge and can repair them by ourselves. But for some large roots fans, such as two blade fan, because of its large impeller size, special mechanical equipment is needed to deal with it, so if there is a problem with the impeller clearance of the fan, it is necessary to go back to the factory for overhaul.

2.轴承已发生弯曲，破裂。

2. The bearing has been bent and cracked.

轴瓦是联接叶轮和电机的重要组成部分，有的厂家生产的叶轮质量不合格，或出厂时未进行检测，轴瓦存在较严重的平衡误差，因此，罗茨风机在长时间运行下，很容易发生轴瓦变形，严重的情况会导致罗茨风机轴断及电机烧毁。

Bearing bush is an important part of connecting impeller and motor. The quality of impeller produced by some manufacturers is not up to standard, or the bearing bush is not tested before leaving the factory. There is a serious balance error in the bearing bush. Therefore, bearing bush deformation is easy to occur when roots blower is running for a long time, and serious situation will lead to shaft fracture of Roots blower and motor burning.

如果这样的话，我们就需要将机器设备返回工厂，进行调整，并在安装前做相关的测试。

In this case, we need to return the machines and equipment to the factory for adjustment and relevant tests before installation.

3.风机马达故障。

3. Fan motor failure.

若电动机有问题，需将其拆装，退回原厂检修，电动机在不合理的工作环境中容易造成损坏，而且，电动机的损坏一般难以恢复，不返回原厂修理，就难以保证电动机的使用寿命。

If there is a problem with the motor, it needs to be disassembled and returned to the original factory for maintenance. The motor is easy to be damaged in the unreasonable working environment, and the damage of the motor is generally difficult to recover. If it is not returned to the original factory for repair, it is difficult to guarantee the service life of the motor.

感谢您的阅读，希望以上内容对您有所帮助，如您想了解更多精彩内容请点击我们的官网：山西罗茨风机厂家http://www.sdyqtc.com。

Thank you for your reading. I hope the above content will be helpful to you. If you want to know more wonderful content, please click our official website: Shanxi roots blower manufacturer http://www.sdyqtc.com .

相关文章： 陕西离心式风机厂家 净化器 气力输送设备厂家 油烟 甘肃回转风机厂家