离心风机在我们的生活中应用的范围非常广泛，而随着社会的发展和经济的变化，离心风机在各行各业的应用也逐渐多了起来，而随着离心风机的应用越来越广泛，很多朋友反映离心风机出现磨损的情况，那么想要解决磨损的情况，首先我们需要了解它磨损的原因，才能找到解决风机磨损的措施，下面咱们就跟陕西离心式风机厂家一起来了解一下离心风机的磨损的原因及处理措施!

Centrifugal fan is widely used in our life. With the development of society and the change of economy, the application of centrifugal fan in all walks of life has gradually increased. With the application of centrifugal fan becoming more and more widely, many friends reflect the wear of centrifugal fan. In order to solve the wear problem, first of all, we need to understand the reasons for its wear In order to find the measures to solve the problem of fan wear, let's work with Shaanxi centrifugal fan manufacturers to understand the causes of centrifugal fan wear and treatment measures!

1、原因

1. Why

(1)经营情况不合理

(1) Unreasonable operation

离心风机具有防止系统磨损、结构、功能的功能。这改变了风扇马达、转子、刀片的运行状态，改变了风扇的内部结构，改变了卡车，进行空气移动偏移和移动，使风扇的磨损更加严重。长期驾驶，高负荷下电风扇的磨损增强了。

The centrifugal fan has the function of preventing system wear, structure and function. This changes the running state of the fan motor, rotor and blade, changes the internal structure of the fan, changes the truck, and makes the air move, offset and move, which makes the wear of the fan more serious. Long term driving, the wear of the electric fan under high load is enhanced.

(2)速度太快

(2) It's too fast

运行速度是造成风机磨损的另一个重要原因，根据风机磨损的数据分析，磨损程度与风机运行速度呈正相关，风机运行速度加倍，风机磨损三倍，风机磨损普遍，风机运行速度的平方为支柱。

Running speed is another important cause of fan wear. According to the data analysis of fan wear, the degree of wear is positively correlated with the running speed of the fan. The running speed of the fan is doubled, the fan wear is three times, the fan wear is common, and the square of the running speed of the fan is the pillar.

(3)化工厂选用的风机出了差错

(3) The fan selected by the chemical plant has gone wrong

位置不同，功能设置不同。为了适应不同的设计状态，设计与实际的间隙、功能和需要的差异形成了风机选型问题。风扇过载工作和风扇磨损容易形成问题。

Different location, different function settings. In order to adapt to different design state, the gap between design and actual, function and need difference form the problem of fan selection. Fan overload work and fan wear easily cause problems.

(4)对除尘风机的磨损

(4) Abrasion of dust removal fan

在化工厂使用时，由于长期积累，工作中的大量粉尘会对风轴承、叶片和电机造成损坏。由于粉尘粒径小，种类多，许多粉尘不能有效清除，容易在风机的易碎部位形成伤口。

When used in chemical plant, a large amount of dust will damage the wind bearing, blade and motor due to long-term accumulation. Due to the small particle size and many kinds of dust, many dust can not be effectively removed, and it is easy to form a wound in the fragile part of the fan.

2、处理措施

2. Treatment measures

先要先大体检查一下离心风机外壳有没有什么问题，然后检查一下引风机的电机方面，看看轴承箱中的油的质量是否合格，有没有达到标准。之后在看一看润滑系统冷却器的供水方面是否有问题，其次检查一下润滑油的往返油箱是否有阻碍。

First of all, we need to roughly check whether there is any problem with the shell of the centrifugal fan, and then check the motor of the induced draft fan to see whether the quality of the oil in the bearing box is qualified and whether it meets the standard. After that, check whether there is any problem in the water supply of the cooler of the lubrication system, and then check whether there is any obstacle in the return of the lubricating oil to and from the oil tank.

然后检查下电机、主机和液力耦合器的相对位置是否正确。一定要确保液力耦合器的位置要低于电机和主机。

Then check whether the relative positions of the lower motor, the main engine and the hydraulic coupler are correct. Make sure that the position of the hydraulic coupling is lower than that of the motor and the main engine.

还要检查一下风机的盘车机构与离合器，油箱中有没有适量的润滑油;检查一下周围乃至整个引风机的螺丝的松紧问题，一定要确保每个压紧螺栓的紧固性。其次还要看一看机壳与进气箱、水阀等连接处是否紧固。

Also check whether there is proper amount of lubricating oil in the barring mechanism, clutch and oil tank of the fan; check the tightness of the screws around and even the whole induced draft fan, and make sure the tightness of each pressing bolt. Secondly, we need to see if the connection between the casing and the intake box, water valve, etc. is tight.

上述就是陕西离心式风机厂家整理的离心风机出现磨损的原因及处理方法，你学会了吗!以后大家遇到风机磨损的问题，可以根据以上措施来做出相应的解决办法!如您想要了解更多资讯内容欢迎点击我们的网站http://www.sdyqtc.com。

The above is the reason and treatment of centrifugal fan wear sorted out by Shaanxi centrifugal fan manufacturers. Have you learned it? If you encounter the problem of fan wear in the future, you can make corresponding solutions according to the above measures! If you want to know more information, please click our website http://www.sdyqtc.com .

相关文章： 陕西离心式风机厂家 净化器 气力输送设备厂家 油烟 甘肃回转风机厂家